StAr-luNAC since 15 December 2007

Pay Per Click Management
Google

Saturday, March 8, 2008

Saturn's Moon Have Rings?




PASADENA, Calif. -- NASA's Cassini spacecraft has found evidence of material orbiting Rhea, Saturn's second largest moon. This is the first time rings may have been found around a moon.

A broad debris disk and at least one ring appear to have been detected by a suite of six instruments on Cassini specifically designed to study the atmospheres and particles around Saturn and its moons.


Artist concept of Rhea's ring

"Until now, only planets were known to have rings, but now Rhea seems to have some family ties to its ringed parent Saturn," said Geraint Jones, a Cassini scientist and lead author on a paper that appears in the March 7 issue of the journal Science. Jones began this work while at the Max Planck Institute for Solar System Research, Katlenburg-Lindau, Germany, and is now at the Mullard Space Science Laboratory, University College, London.

Rhea is roughly 1,500 kilometers (950 miles) in diameter. The apparent debris disk measures several thousand miles from end to end. The particles that make up the disk and any embedded rings probably range from the size of small pebbles to boulders. An additional dust cloud may extend up to 5,900 kilometers (3,000 miles) from the moon's center, almost eight times the radius of Rhea.



"Like finding planets around other stars, and moons around asteroids, these findings are opening a new field of rings around moons," said Norbert Krupp, a scientist with Cassini's Magnetospheric Imaging Instrument from the Max Planck Institute for Solar System Research.

Since the discovery, Cassini scientists have carried out numerical simulations to determine if Rhea can maintain rings. The models show that Rhea's gravity field, in combination with its orbit around Saturn, could allow rings that form to remain in place for a very long time.

The discovery was a result of a Cassini close flyby of Rhea in November 2005, when instruments on the spacecraft observed the environment around the moon. Three instruments sampled dust directly. The existence of some debris was expected because a rain of dust constantly hits Saturn's moons, including Rhea, knocking particles into space around them. Other instruments' observations showed how the moon was interacting with Saturn's magnetosphere, and ruled out the possibility of an atmosphere.

Evidence for a debris disk in addition to this tenuous dust cloud came from a gradual drop on either side of Rhea in the number of electrons detected by two of Cassini's instruments. Material near Rhea appeared to be shielding Cassini from the usual rain of electrons. Cassini's Magnetospheric Imaging Instrument detected sharp, brief drops in electrons on both sides of the moon, suggesting the presence of rings within the disk of debris. The rings of Uranus were found in a similar fashion, by NASA's Kuiper Airborne Observatory in 1977, when light from a star blinked on and off as it passed behind Uranus' rings.

"Seeing almost the same signatures on either side of Rhea was the clincher," added Jones. "After ruling out many other possibilities, we said these are most likely rings. No one was expecting rings around a moon."

One possible explanation for these rings is that they are remnants from an asteroid or comet collision in Rhea's distant past. Such a collision may have pitched large quantities of gas and solid particles around Rhea. Once the gas dissipated, all that remained were the ring particles. Other moons of Saturn, such as Mimas, show evidence of a catastrophic collision that almost tore the moon apart.

"The diversity in our solar system never fails to amaze us," said Candy Hansen, co-author and Cassini scientist on the Ultraviolet Imaging Spectrograph at NASA's Jet Propulsion Laboratory, Pasadena, Calif. "Many years ago we thought Saturn was the only planet with rings. Now we may have a moon of Saturn that is a miniature version of its even more elaborately decorated parent."

These ring findings make Rhea a prime candidate for further study. Initial observations by the imaging team when Rhea was near the sun in the sky did not detect dust near the moon remotely. Additional observations are planned to look for the larger particles.

The Cassini-Huygens mission is a cooperative project of NASA, the European Space Agency and the Italian Space Agency. JPL, a division of the California Institute of Technology in Pasadena, manages the Cassini-Huygens mission for NASA's Science Mission Directorate, Washington. The Cassini orbiter was designed, developed and assembled at JPL. The Magnetospheric Imaging Instrument was designed, built and is operated by an international team led by the Applied Physics Laboratory of the Johns Hopkins University, Laurel, Md.

For information on the Cassini mission, visit: http://www.nasa.gov/cassini and http://saturn.jpl.nasa.gov .
Source : http://www.nasa.gov/mission_pages/cassini/media/rhea20080306.html

Thursday, March 6, 2008

STS-123 : Endeavour Mission Timeline

STS-123 Timeline :

Day 1




  • Endeavour launches from NASA's Kennedy Space Center in Florida
  • Open Payload Bay Doors
  • Power Up Shuttle's Robot Arm
Day 2
  • Inspect orbiter's heat shield using robot arm with boom.
Day 3
  • Endeavour performs backflip, or Rendezvous Pitch Maneuver
  • International Space Station crew photographs Endeavour
  • Endeavour docks to Space Station.
Day 4


  • Astronauts Linnehan and Reisman make first spacewalk
  • First segment of Japanese Kibo module installed on Station's Harmony node
Day 5


  • Astronauts enter Japanese module
Day 6
  • Linnehan and Foreman make second spacewalk, working on assembly of two armed Canadian robot, dubbed Dextre
Day 7
  • Japanese module outfitting
  • Dextre testing
Day 8


  • Linnehan and Behnken make third spacewalk, working on station assembly and maintenance
Day 9
  • Crew off duty period
  • Robotics work with Dextre
Day 10
  • Crew off duty
  • Preparation for fourth spacewalk
Day 11
  • Behnken and Foreman make fourth spacewalk, working on space maintenance and testing a shuttle repair method
Day 12
  • Late inspection of Endeavour''s Heat Shield
Day 13
  • Behnken and Foreman make fifth spacewalk, storing shuttle's robotic boom on the station to make room for cargo on next shuttle's mission
Day 14
  • Final cargo transfers
  • Join Crews on news conference
Day 15


  • Endeavour undocks from International Space Station
  • Endeavour flies around space station
Day 16
  • Crew prepares for landing
Day 17


  • De-orbit burn
  • Endeavour lands at Kennedy Space Station, Florida
source : http://www.nasa.com

Endeavour Crews Launch On March 11



The Endeavour crew members continue their training at NASA's Johnson Space Center in Houston, reviewing spacewalking procedures and practicing entry and landing inside the motion-based simulator.

After completion of their pre-launch training for the STS-123 mission, the astronauts will fly in to Kennedy Space Center on Friday at about 9 p.m. EST.

All systems are "go" with the space shuttle that will fly the astronauts, a space station module and a robotics system to the International Space Station on March 11 at 2:28 a.m. EDT.
STS-123 is an international mission combining the expertise and experience of several countries working together to create a working 'home' in space.

The crew will deliver the first section of the Japanese-built Kibo laboratory and the Canadian Space Agency's two-armed robotic system called Dextre.

The flight is commanded by Dominic Gorie with Gregory H. Johnson serving as Pilot. The crew also includes Mission Specialists Rick Linnehan, Robert L. Behnken, Mike Foreman, Garrett Reisman and Japanese astronaut Takao Doi.

Reisman will stay aboard the station, trading places with European Space Agency astronaut Léopold Eyharts, who will return to Earth with the crew of Endeavour.

source : http://www.nasa.com
Related Posts Plugin for WordPress, Blogger...